For the 2003 ford explorer, set the spark plug gap to 0.052. But i've searched and can't seem to find the proper gap for a 2008 4.6l If for some reason that sticker is missing, the correct plug gap is 0.054
How to Gap a Spark Plug: 8 Steps (with Pictures) - wikiHow
The motorcraft plug listed on the sticker is exactly the same plug as the autolite app103
Always refer to the manufacturer’s recommended values.
On the passenger side of the intake manifold, coming off the bottom about the center of the engine front to back, you'll feel a hose that comes off a nipple That hose makes a 90 degree bend. I pulled one of the spark plugs. I'm getting some maintenance done tomorrow and will have ngk 95606 plugs installed
Should i go 0.028 or leave at the 0.031 Bill jones and 2 others 3 Spark plug gap chart by vehicle with exact specs, torque values, and plug types for 80+ makes and models What is the spark plug gap for a 2003 ford explorer
What is the spark plug gap for 2003 ford explorer
Look up the correct spark plug gap range for your engine type and convert any gap measurement between inches and millimeters instantly The guide uses an internal lookup table keyed. .054 would be normal gap for ranger 4.0l, ohv or sohc, use that slightly larger gap will give better starting and low rpm performance,.059 smaller gap better high rpm performance,.049. For the 2003 ford explorer, set the spark plug gap to 0.052 inches (1.32 mm)
Before installation, check the gap with a feeler gauge and. On the documentation that comes with jacobs spark plug wires, it says that you can safely open the spark plug gap.005 over and that by doing so you would get a little more kick. Well my google/duckduckgo foo has failed me (plus a good forum search) on what the proper spark plug gap is for the 2003 5.4l 2v triton The leader so far is 54 thousands but a couple of.
Sorry to start another spark plug thread
